SKU: LUS210Z

Simpson LUS210Z 2x10 Face Mount Hanger - Zmax Finish

Simpson LUS210Z 2x10 Face Mount Hanger - Zmax Finish!

  • Simpson LUS210 2x10 Face Mount Hanger - G90 Galvanized
  • Simpson LUS210Z 2x10 Face Mount Hanger Zmax Finish image 1 of 2
  • Simpson LUS210 2x10 Face Mount Hanger illustration
  • Simpson LUS210Z 2x10 Face Mount Hanger Zmax Finish image 2 of 2
1 4

Continue Browsing

LUS Joist Hangers
SKU: LUS210Z

Simpson LUS210Z 2x10 Face Mount Hanger - Zmax Finish

$2.25
 
Request Bulk Pricing
Request Bulk Pricing
Ships today, order in the next 13 hours 21 minutes
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Finish: Zmax Finish
Fasteners required: Header - (8) 0.148 x 3" Nails OR (8) #9 x 1-1/2" SD Connector Screws Joist - (4) 0.148 x 3" Nails OR (4) #9 x 2-1/2" SD Connector Screws
For Treated Lumber: Yes
Height: 7-13/16"
Joist size: 2X10
Manufacturer name: Simpson Strong-Tie
Width: 1-9/16"
Description

Simpson Strong-Tie LUS hangers are a light capacity joist hanger that utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. The Strong-Tie LUS210Z face mount joist hanger features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.


Installation:
  • Use all specified fasteners.
  • Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
  • Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • 16d sinkers (0.148" dia. x 3 1/4" long) may be used where 10d commons are specified with no reduction in load. Where 16d commons are specified, 10d commons or 16d sinkers (0.148" dia. x 3 1/4" long) may be used at 0.85 of the table load.
  • With 2x carrying members, use 10d x 1 1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the table value.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values


California Residents: WARNING

More
View full details

Continue Browsing

LUS Joist Hangers

× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
  • Our footprint

    We are on a mission to expand our national reach—offering more product selection and faster delivery times. So far we’ve made remarkable progress in our expansion efforts, effectively doubling our capacity by adding a new 47,000 sq. ft. warehouse in Simpsonville, South Carolina, in addition to our existing 60,000 sq. ft. facility in Urbana, Iowa.

  • Our experience

    We pride ourselves on delivering a user-friendly, high quality experience online and over the phone. Our knowledgeable team of experts is readily available via phone to assist with product questions and custom pricing inquiries. We’re available Monday thru Friday from 7:00 AM – 5:00 PM CST. We look forward to supporting you on your next job.

  • Proud distributor

    We partner with trusted manufacturers in the fasteners industry to bring our customers a selection of over 10,000 different products. Fasteners Plus is one of only four Certified Platinum E-Commerce Vendors of Simpson Strong-Tie products, one of the largest suppliers of high-quality structural building products in the world.