SKU: THGB2

Simpson THGB2 Truss Girder Hanger, PKG 1

Simpson THGB2 Truss Girder Hanger, PKG 1!

Skip to product information
$296.47
 
Request Bulk Pricing
Request Bulk Pricing
Ships FREE Dec 27 when you add 1 to your cart
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Fasteners required: SEE PRODUCT GUIDE DOCUMENT
For Treated Lumber: No
Manufacturer name: Simpson Strong-Tie
Description

Simpson THGB truss girder hangers are high capacity, welded hangers designed for multi-ply girder trusses. The THGB series offers optional installation with Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws, and the bolted THGBH hangers offer higher design loads. For a lower cost alternative that uses Strong-Drive SDS Heavy-Duty Connector screws instead of bolts and offers high load capacities, see the THGQ/THGQH series.


Installation:
  • Use all specified fasteners.
  • All multiple members must be fastened together to act as a single unit.
  • Maximum 11 7/8" bottom chord in the carrying member to allow for the minimum bolt end distance.
  • Bolts must be installed symmetrically when using less than 8 bolts on the 8-bolt backplate.
  • Girders must be adequately laterally braced to prevent excessive displacement due to secondary torsional stresses (Ref ANSI/TPI 1-2007 Section 7.5.3.5).

California Residents: WARNING

View full details
× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)