SKU: TB56

Simpson TB56 Tension Bridging - G90 Galvanized

Simpson TB56 Tension Bridging - G90 Galvanized!

Skip to product information
1 of 3

Continue Browsing

TB Tension Bridging

$7.78
 
Request Bulk Pricing
Request Bulk Pricing
Ships today, order in the next 2 hours 20 minutes
Fill out the form below or give our sales consultants a call at 866-421-4854.

Specifications

Finish: G90 Galvanized
Length: 56"
Material: Galvanized Steel
Fasteners required: (4) 0.148" X 1-1/2"
Manufacturer name: Simpson Strong-Tie
Quantity: 1
Thickness: 20 Gauge
Description

The Simpson Strong-Tie tension-type bridging with maximum nailing flexibility is a cost effective way to provide additional support between floor joists. Installing TB56 tension bridging solves the problem of floors bouncing or flexing while being walked on. The tension bridging spreads the weight-load which reduces the possibility to structural damage as well. Use just two of the seven nail holes at each end.


Installation:

  • Support floor joists with a depth-to-thickness ratio of six or more with bridging at intervals not exceeding 8'. If span is greater than 8', install on 2x8 or larger joists. If span is greater than 16', use more than one pair.
  • Tension bridging works only in tension, so must be used in cross pairs.
  • Install bridging tightly; loose installation may allow floor movement.
  • NCA may be installed before or after sheathing, from the top or bottom. Simply locate the bend line approximately 1" from the joist edge.
  • NCA has nail holes in one end for use if a prong is bent during installation. Fully seat nails (0.131" x 1 1/2") if they are used; otherwise, they may lead to squeaks.
  • TB requires two 0.148" x 1 1/2" fasteners per end.

California Residents: WARNING

View full details

Continue Browsing

TB Tension Bridging

× WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information visit: www.P65Warnings.ca.gov.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)